- Aloitussivu /
- Business, Industry & Science /
- Industrial Electrical /
- Controls & Indicators /
- Relays /
- Electromechanical Relays /
- 4pcs Relay Module DC 5V 1 Channel Relay Board...
4pcs Relay Module DC 5V 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger
€ 16
Price Details
Excluding Shipping & Custom charges ( Shipping and custom charges will be calculated on checkout )
*All items will import from Iso-Britannia
Ubuy tekee kovasti töitä turvallisuutesi ja yksityisyytesi suojaamiseksi. Kehittynyt maksun turvallisuusjärjestelmämme varmistaa luottamuksellisuuden salaamalla tietosi siirron aikana AES (Advanced Encryption Standards)- ja SSL (Secure Socket Layer) -protokollilla. Maksutietosi ovat 100 % turvassa, sillä emme jaa maksutietojasi kolmansien osapuolten myyjille.
The 5V Relay Module features a Fault-Tolerant Design and Optocoupler Isolation for strong driving ability and stable performance.
Osta nyt, maksa myöhemmin
Fast
Shipping
Ilmainen
palautus*
Pakattu turvallisesti
100-prosenttisesti alkuperäistuotteita
PCI DSS Compliance
ISO 27001 Certified
Tuotteen yksityiskohdat
- 5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
| Liittimen tyyppi | Screw |
| Contact Type | Normally Closed |
| Nykyinen arvio | 10 Amps |
| Asennustyyppi | Board Mount |
| Toimintatila | automaattinen |
| Watti | 25 Milliwatts |
| Coil Voltage | 5 Volts |
| Contact Current Rating | 10 Amps |
| Maximum Switching Voltage | 5 Volts |
| Minimum Switching Voltage | 5 Volts (DC) |
| Brändi | AEDIKO |
| UPC | 701715501980 |
| Valmistajan osanumero | AE001EU |
| Alkuperämaa | Kiina |
| Valmistaja | AEDIKO |
| Contact Material | Silver Alloy |
| Tuotteen paino | 0,75 lbs (340 grammaa) |
TUOTEKUVAUS.
Asiakkaiden kysymykset ja vastaukset
-
kysymys:
What is the maximum load capacity of the relay?
vastaus: The relay can handle up to 10A at 250VAC, 15A at 125VAC, or 10A at 30VDC. -
kysymys:
Can I use this relay module with microcontrollers?
vastaus: Yes, it works well with ARM, PIC, AVR, MCU, Raspberry Pi, CNC machines, and more. -
kysymys:
How does the optocoupler isolation benefit me?
vastaus: It prevents damage to your I/O ports by isolating them from switching currents.
AEDIKO Electromechanical Relays Editorial Review
The 4pcs Relay Module DC 5V 1 Channel Relay Board with Optocoupler Isolation has received a mixed reception from users, reflecting both satisfaction with its functionality and disappointment over certain design aspects. Users praised the reliability of the relay functions, noting that it successfully integrated with other devices like Arduino boards for CNC applications without issues. The option for both normally closed (NC) and normally open (NO) configurations was also highlighted as a positive feature. However, the relay module's terminal blocks garnered significant criticism. Users reported difficulties when attempting to insert wires, blaming the poorly designed terminal screws, which seemed too soft and often stripped easily. This led to frustrations in securing connections properly, making it a nuisance especially for projects involving high signal noise or frequency. Some users attempted makeshift fixes, which further illustrated the product's inadequacies in this area. Despite its initial success in controlling circuits through optocoupler isolation — a feature aimed to keep power rails separate and eliminate interference — the performance of the relay was compromised for some users when dealing with “noisy” signals. A few customers reported instances of module failure soon after use, although some accepted this as a reasonable risk given the low price point. Most users echoed sentiments that while the relays perform their primary function adequately, the accompanying terminal blocks are frustratingly inadequate. In summary, the 4pcs Relay Module DC 5V 1 Channel Relay Board has been effective for basic relay tasks, but the design flaws in terminal connections and occasional reliability issues detract from an otherwise functional product. **
Asiakkaiden arvostelut ja arvosanat
-
5 tähteä
57%
-
4 tähteä
25%
-
3 tähteä
7%
-
2 tähteä
7%
-
1 tähteä
4%
Arvostele tämä tuote
Jaa ajatuksesi muille asiakkaille
Plussat
- Functions reliably with Arduino and other setups
- Supports both NC and NO relay configurations
- Affordable price for a set of four modules
Miinukset
- Poor design of terminal blocks; difficult to insert wires and secure connections
Platform Trust & Buyer Confidence
“The product received very good packaging & safe…Thank You”
“Accurate delivery timing given”
“Not madly expensive like I thought, and much quicker than promised.”
“Never dealt with Ubuy before, but everything worked out great. Seamless cross border purchasing and shipping. Thanks!”
“The process was smooth, with clear communication and timelines. This was my 1st purchase and I am really impressed. I will definitely be coming back.”
Tuotteen hintahistoria
Tärkeitä tietoja
- Rajoitukset: Kansainvälisesti toimitettujen tuotteiden kohdalla tulee ottaa huomioon, ettei valmistajan takuu välttämättä ole voimassa, etteivät valmistajan huoltovaihtoehdot välttämättä ole käytettävissä, etteivät tuotteen ohjekirjat, oppaat ja turvallisuusvaroitukset välttämättä ole kohdemaan kielellä, ettei tuotteita (ja niiden oheismateriaalia) ole välttämättä suunniteltu vastaamaan kohdemaan standardeja, teknisiä tietoja ja merkintävaatimuksia ja etteivät tuotteet välttämättä vastaa kohdemaan jännitettä ja muita sähköstandardeja (jolloin ne saattavat tarvittaessa vaatia sovittimen tai muuntimen käyttöä). Vastaanottaja on vastuussa sen varmistamisesta, että tuote voidaan toimittaa kohdemaahan laillisesti. Kun vastaanottaja tekee tilauksen Ubuysta tai sen kumppanuusyhtiöiltä, hän on myös rekisteröity maahantuoja ja hänen tulee noudattaa kaikkia kohdemaan lakeja ja säädöksiä.
- Kaikki Ubuyssa listatut tuotteet eivät ole myytävänä, koska Ubuy on maailmanlaajuinen hakukone. Tuotteisiin kohdistuu vienti- ja myyntisäännöksiä.
€ 16
Tee tilaus nyt, niin saat tuotteen noin Monday, Heinäkuu 27
This item is not restrict in my country.(Please click on above link if this item is not restrict in your country, So our team will review and allow.)
QTY:
PCI DSS compliant and ISO 27001:2022 certified, with encrypted payments and full buyer protection on every order.
Ominaisuudet ja hyödyt
- Operates at a DC 5V working voltage for versatile applications.
- Compatible with loads up to 10A 250VAC and 15A 125VAC.
- Quick action and release times enhance efficiency: <10ms and <5ms.
- User-friendly design with terminals for easy wiring connections.
- Optocoupler isolation protects I/O ports from damage.
- Fault-tolerant design ensures reliability, even if control lines fail.
Ubuy Assurance
Experience worry-free shopping with 100% original products, PCI DSS-compliant payment security, ISO 27001-certified data protection, the fastest cross-border delivery, free returns *, and secure packaging on every order.






